Our products cover the spectrum of soft and hardwood dimension lumber, boards and plywoods, as well as framing lumber, packaging lumber, crates and concrete forming products. We also offer pressure treated and interior fire retardant treated lumber and plywood.
Siding and Trim
 |
For projects that call for vertical siding, HardiePanel® vertical siding provides value and long-lasting performance.
|
As with all of our exterior products, HardiePanel ® is engineered for climate and will stand up against the harshest weather conditions. When combined with HardieTrim ® Batten boards, HardiePanel vertical siding gives you traditional a board-and-batten look. HardiePanel vertical siding comes with our strongest warranty ever; a 30 year nonprorated, transerable, limited warranty.
>> CLICK HERE TO LEARN MORE
|
|
 |
LP® SmartSide® products deliver all the warmth and beauty of traditional wood, plus the durability and workability of engineered wood.
|
|
|
|
|
Don't settle for cookie-cutter design. Now, you have access to a palette of distinctive choices.
|
| Exterior Portfolio™ by Crane is a complete collection of cladding products that will give the face of your home an image you will love. The unlimited design options of Exterior Portfolio have been used to create some of America's most beautiful homes. Now you can enjoy this same impact with the added value of long-lasting, maintenance-free performance.
>> CLICK HERE TO LEARN MORE
|
|
Dragon Trim is a soft hardwood native to China. The heartwood is light in color and the sapwood even lighter.
|
Color differential between the two is not distinct. The wood is without odor or taste and is mostly free from knots. Planed or sanded, it has the feel of spun silk.
Wood Structure
The demarcation between heartwood and sapwood is not clear and the wood is straight grained and lustrous.
Wood Properties
Dragon Trim is comparatively soft and light in weight for a hardwood. Physical weight is slightly less than kiln dried western red cedar. It is low in overall strength, but has a high strength to weight ratio. The shrinkage coefficient is smaller than most commercially harvested coniferous and broad leaf woods. The wood dries rapidly and does not easily warp, cup, end check, splinter or split. Movement in service is rated as small. Dragon Trim has one of the lowest thermal conductivity values of any wood; therefore the wood has very high insulation properties. Low thermal conductivity contributes to the low shrinkage in use. Compared to most woods, Dragon Trim has a high resistance to fire and flames and a higher ignition/flash point. Dragon Trim is naturally decay resistant and any rot is generally superficial. The wood is also naturally resistant to insect attack. Dragon Trim has no measurable pitch, resin or tannins so it is not subject to extractive bleeding.
>> CLICK HERE TO LEARN MORE
|
|
 |
VERSATEX Trimboard products are created from cellular PVC in the most state of the art manufacturing facility in the industry.
|
| Whether you're using VERSATEX for trim, fascia, soffit, or a decorative exterior moulding piece, you will find their manufacturing process provides a product that features the real look and craftsmanship of a premium lumber without the moisture problems of wood. Their products include trimboards, sheet, cornerboards, T&G beaded profiles as well as our innovative patent-pending Stealth Trim System, all manufactured with the highest level of quality and featuring a fully transferable 30-year limited warranty.
>> CLICK HERE TO LEARN MORE
|
|
 |
Cortex Concealed Fastening System for PVC Trim
|
|
The Cortex Concealed Fastening System is the fastest, easiest way to conceal the fastener heads when installing PVC trim boards. No more caulking, sanding or painting needed!
Available in smooth or grained finish for Versatex® Trim
Each package comes complete with screws, plugs, and setting tools. Available in a 50, 250 and 750 lin ft box.
>> CLICK HERE TO LEARN MORE
|
|
|
|
Fry Reglet products stem from 50 years of working with architects and designers to solve the most challenging applications.
|
The latest addition to our product family is the revolutionary graph interior surface system.
- interior surface systems
- column covers
- reveals and moldings
- acoustical wall panels
- roof flashings
- glazing systems
- specialty products
>> CLICK HERE TO LEARN MORE
|
|
|
|
SturdiMount Fiber Cement Mount Blocks
|
|
SturdiMount products are the first fiber cement mounting blocks, and are manufactured to enhance fiber cement claddings. A full line of easy to install mounting blocks are available to create a cohesive, unified look.
SturdiMount products are manufactured to provide a better match to fiber cement claddings than vinyl mounting blocks and result in a more aesthetically pleasing result.
>> CLICK HERE TO LEARN MORE
|
|
|
|
BearSkin Fiber Cement Joint Flashing
|
Flash your butt joint with a Bear Skin
- Each sheet is pre-cut with a stick-it adhesive for the fastest application available
- Quick and easy to apply
- Conveniently clips to your belt or tool pouch
- Constructed of a durable material with a 20 year UV rating
- Aids in preventing moisture from penetrating the butt joint
>> CLICK HERE TO LEARN MORE
|
|
Decking and Railing
 |
The country's largest manufacturer of wood-alternative decking, railing and fencing products.
|
|
Trex is the leading brand of alternative decking, railing, fencing, and trim products designed to maximize your outdoor living experience. Trex Company created the composite decking category and revolutionalized the industry. Since then, Trex has inspired many imitators, but they still can't match the enduring quality and beauty of Trex. In the end, there is only one genuine Trex. Be sure to ask for it by name
 |
Decking
Trex® Decking takes the natural
beauty of wood, but leaves behind
all the rotting and splintering
|
 |
Railing
Trex Decking & Railing go
hand-in-hand; creating your
perfect outdoor experience.
|
>> CLICK HERE TO LEARN MORE
|
|
 |
TrapEase II has been designed to eliminate the mushrooming effect caused by standard deck screws in high density composite boards.
|
TrapEase II fasteners have been color-coated to match most composite decking.
JUST ADDED – Four New Colors to Match New Trex Transcends Decking: Fire Pit, Gravel Path, Tree House and Vintage Lantern.
Also for use with:
-
Smooth finished look even in high-density composites
-
Deep #1 square drive provides best bit engagement, reducing cam-out.
-
Concave underside of head conceals loose material for a clean and beautiful finished appearance
-
Approved in ACQ and Copper Azole
>> CLICK HERE TO LEARN MORE
|
|
Engineered
 |
LP® SolidStart® I-Joists are known for their value when it comes to size, strength, and reliability.
|
Manufactured with a wider flange for greater stability and a larger nailing area, LP I-Joists offer exceptional performance and dependability. Our LP SolidStart I-Joist product line offers flanges made of either solid sawn lumber or LVL to meet the needs of residential, commercial or industrial applications. All I-Joists in this extensive product line are backed by a Lifetime Limited Warranty.
>> CLICK HERE TO LEARN MORE
|
|
 |
LP® SolidStart® LVL is an engineered wood product with advantages traditional lumber can't offer.
|
| LP SolidStart LVL is excellent for most load-bearing applications. Remarkably strong and consistent, LP SolidStart LVL is solid, straight and true. Using LP SolidStart LVL eliminates the need to cull through lumber piles, saving time, money and materials on-site. And it is backed by our Lifetime Limited Warranty.
>> CLICK HERE TO LEARN MORE
|
|
 |
LP® SolidStart® LSL is an engineered wood product that's superior in many respects to traditional lumber.
|
| Suitable for a wide range of applications, LSL is ideal for zones within a home where strength and precision are critical. LP is the only manufacturer that offers grades up to 1.75E – the industry's highest grade of LSL. That means LP SolidStart LSL can handle longer spans. Plus it can help reduce labor and material costs and is backed by a Lifetime Limited Warranty.
>> CLICK HERE TO LEARN MORE
|
|
 |
LP® SolidStart® Rim Board is ideal for supporting vertical and lateral loads as part of a floor framing system.
|
|
Manufactured for strength and consistency
LP SolidStart Rim Board increases efficiency on the job site in three ways: It eliminates the need for field-ripping, creates flat surfaces for siding installation, and its high load capacity reduces the need for squash blocks in most multi-story applications.
>> CLICK HERE TO LEARN MORE
|
|
 |
Expand the limits of your next project with Simpson Strong-Tie products that drive development forward.
|
|
From direct or mobile onsite support to an extensive catalog of products available, contractors are able to expand their business confidently knowing Simpson Strong-Tie is supporting them before the job begins to long after it has been completed.
The long-term gains of using high-quality, code-compliant products are directly reflected in decreased liability and increased reliability. We know every contractor wants to build their business on a solid foundation and Simpson Strong-Tie delivers. Check out our easy to navigate solutions, products and resources developed specifically with the contractor in mind. You also can take the opportunity to expand your skill set during a workshop or get some new ideas by browsing product capabilities.
>> CLICK HERE TO LEARN MORE
|
|
 |
LP® Design software offers three user-friendly engineered layout design programs
|
|
LP offers three user-friendly software programs: LP® Solutions™ Software, LP® SolidStart® Wood-E® Design Software, and LP® SolidStart® Wood-E® CAD. These programs are available to help you layout and design accurate wall, floor, and roof plans quickly and efficiently using LP products.
LP also offer training and technical support services for our software programs. For more information on the capabilities of each program, please click on the links below.
>> CLICK HERE TO LEARN MORE
|
|
Boards
 |
Nieman Ponderosa Pine is often specified when appearance rather than strength is of primary importance
|
| Ponderosa Pine has a minimal amount of reddish-brown heartwood and an exceptionally wide sapwood which is honey-toned or straw-like in color. It has a straight, uniform grain which machines to a clear, smooth surface. When freshly sawn or surfaced, its pleasant smell is reminiscent of the forests where it grows.
Ponderosa Pine can be treated for above-ground or in-ground contact, and unlike some softwoods, it can be pressure treated for in-ground use without incising (perforating) the wood. The waterborne preservatives leave a clean, dry, odorless surface ready to be painted or stained. The treated product holds up well in storage, making it easy to yard for distributors and retailers, which in turn, makes it readily and widely available.
>> CLICK HERE TO LEARN MORE
|
|
Lumber
 |
Spruce Lumber
|
|
Pound for pound, fiber for fiber, Spruce lumber has the highest weight to strength ratio making it an attractive solution for airplane building, boat construction and for interior and exterior construction work.
Acoustic Properties
Spruce lumber is a relatively soft, light wood with a uniform texture and straight grain. Its composition is ideal for basic construction and specialized applications. Old growth Spruce has been found to possess exceptional acoustic properties and is used in the construction of pianos, guitars, violins and other musical instruments where acoustical properties are an integral part of engineering.
Framing and Construction
Strait grain means strength and resiliency. Spruce lumber presents a straight grain that is largely attributed to slow and consistent growth patterns. As a result it is also used effectively for structural applications. Tight knit fibers give it the ability to stand up to the elements and present well as an outdoor siding or on decks and balconies.
Airplane and Boat Building
Realizing the significance of a light wood possessing the kind of durability that Sprucewood does, innovative engineers successfully used it build airplane panels and fixtures in the production rush both before and during World War II. Its buoyant properties and lightness made it attractive to boat builders for constructing hulls, oars, ladders and other components. Today Spruce lumber is widely used in boat-building and hobby aircraft industries.
>> CLICK HERE TO LEARN MORE
|
 |
Sourthern Yellow Pine Lumber - Strength, Durability and Economy
|
Versatile Southern Pine lumber is often the building professionals' choice for a wide range of applications. Design values for Southern Pine are the highest of all structural wood species. And when it comes to building outdoors, there's more than just one reason pressure-treated Southern Pine lumber remains the top material selected. Not only is it the most cost-effective way to build a deck, gazebo, dock or pier, but when compared with alternative products, treated Southern Pine outshines the competition hands down.
Southern Pine lumber is the preferred choice for most any building application. Plus, there's no replacement for the natural beauty of real wood.
A variety of great uses for Southern Pine.
- Raised Floor Systems
- Outdoor Living
- Structural Components
- Post-Frame Construction
- Aquatic and Wetland Structures
- Vehicular Bridges and Highway Noise Barriers
- Permanent Wood Foundations
- Material Handling
>> CLICK HERE TO LEARN MORE
|
 |
Hoover Fire Treated Lumber has been strength-tested after prolonged exposure to elevated temperatures and moisture to verify its strength characteristics.
|
|
Pyro-Guard is the only major fire-retardant formulation produced by an American-owned company.
Pyro-Guard plywood span ratings and lumber design value adjustments are based on strength testing after prolonged exposure to high temperatures experienced in roof applications.
Pyro-Guard fire-retardant treated wood is produced in 5 strategically located company-owned facilities and is distributed by an extensive nationwide network of stocking distributors.
Exterior Fire-X® retardant treated wood is recommended for exterior exposures and other applications exposed to dampness, high humidity or wetting.
>> CLICK HERE TO LEARN MORE
|
|
 |
Bluwood - Barrier Protection System is lumber treated with a unique, two-product technology called Perfect Barrier System.
|
| BluWood components are protected against the devastating consequences to wood of fungal and termite infestation. Before you build, make sure to ask your builder to use BluWood for all framing lumber, trusses and sheathing components.
>> CLICK HERE TO LEARN MORE
|
|
 |
FSC Certified standards represent the world's strongest system for guiding forest management toward sustainable outcomes.
|
|
The Forest Stewardship Council was created to change the dialogue about and the practice of sustainable forestry worldwide. This impressive goal has in many ways been achieved, yet there is more work to be done. FSC sets forth principles, criteria, and standards that span economic, social, and environmental concerns. Like the forestry profession itself, the FSC system includes stakeholders with a diverse array of perspectives on what represents a well-managed and sustainable forest. While the discussion continues, the FSC standards for forest management have now been applied in over 57 countries around the world.
>> CLICK HERE TO LEARN MORE
|
|
 |
Furring Strips
|
|
Furring strips typically measure 1" x 2" or 1" x 3". They can be laid out perpendicular to studs or joists and nailed to them, or set vertically against an existing wall surface. The spacing between the strips depends on the type of finishing material. Wider spacing is typically used behind the heavy boards that support ceramic tiles. Closely spaced strips are needed for thin panelling or plaster. The use of strips with plaster, however, is called either lath and plaster or wattle and daub.
Furring is also used to support roof materials and may be seen under barn and shed roofs, but is often replaced in contemporary times by labor-saving plywood. Drywall has become the most common interior wall finishing material and doesn't need furring due to its strength. Furring is still used in remodeling work to fill out uneven sections for resurfacing, or to add room for insulation.
|
|
Panels
 |
CDX Plywood - The Original Engineered Wood Product
|
|
Manufactured from thin sheets of cross-laminated veneer and bonded under heat and pressure with strong adhesives, plywood has been one of the most ubiquitous building products for decades.
Plywood manufactured by APA member mills is available in a wide variety of appearance grades ranging from smooth, natural surfaces suitable for finish work and underlayment to more economical grades used for wall sheathing and subfloors. With more than a dozen common thicknesses and over twenty different grades, it's easy to specify the right panel for the job.
>> CLICK HERE TO LEARN MORE
|
|
Bluwood - Barrier Protection System is lumber treated with a unique, two-product technology called Perfect Barrier System.
|
| BluWood components are protected against the devastating consequences to wood of fungal and termite infestation. Before you build, make sure to ask your builder to use BluWood for all framing lumber, trusses and sheathing components.
>> CLICK HERE TO LEARN MORE
|
|
 |
Sanded Plywood - Selex by CMPC - Outstanding appearance, free of defects, suitable for decorative paneling and ceilings.
|
| Excellent weight-volume ratio makes for easy handling. Exterior glue favors suitability for interiors and exteriors.
>> CLICK HERE TO LEARN MORE
|
|
 |
Plyform - Concrete Forming
|
|
Plywood is an ideal material for concrete forming. It produces smooth concrete surfaces and can be used repeatedly - some overlaid panels up to 200 times or more. The thinner panels can be bent easily for curved forms and liners. Plywood's excellent stiffness minimizes deflection during pouring. Its natural insulating qualities help provide more consistent curing conditions. The large panel size and light weight reduce form construction and stripping time. And various surface textures are available for imparting attractive and unusual concrete textures.
>> CLICK HERE TO LEARN MORE
|
|
Hoover Fire Treated Plywood span ratings and lumber design value adjustments are based on strength testing after prolonged exposure to high temperatures.
|
|
Pyro-Guard has been strength-tested after prolonged exposure to elevated temperatures and moisture to verify its strength characteristics when used in roof systems and other recommended applications.
Pyro-Guard is the only major fire-retardant formulation produced by an American-owned company.
Pyro-Guard fire-retardant treated wood is produced in 5 strategically located company-owned facilities and is distributed by an extensive nationwide network of stocking distributors.
Exterior Fire-X® retardant treated wood is recommended for exterior exposures and other applications exposed to dampness, high humidity or wetting.
>> CLICK HERE TO LEARN MORE
|
|
|
FSC Plywood
|
| The Forest Stewardship Council was created to change the dialogue about and the practice of sustainable forestry worldwide. This impressive goal has in many ways been achieved, yet there is more work to be done. FSC sets forth principles, criteria, and standards that span economic, social, and environmental concerns. The FSC standards represent the world's strongest system for guiding forest management toward sustainable outcomes. Like the forestry profession itself, the FSC system includes stakeholders with a diverse array of perspectives on what represents a well-managed and sustainable forest. While the discussion continues, the FSC standards for forest management have now been applied in over 57 countries around the world.
>> CLICK HERE TO LEARN MORE
|
|
 |
Oriented Strand Board (OSB) is manufactured from waterproof heat-cured adhesives and rectangularly shaped wood strands
|
| OSB is manufactured from waterproof heat-cured adhesives and rectangularly shaped wood strands that are arranged in cross-oriented layers, similar to plywood. This results in a structural engineered wood panel that shares many of the strength and performance characteristics of plywood. Produced in huge, continuous mats, OSB is a solid panel product of consistent quality with no laps, gaps or voids.
>> CLICK HERE TO LEARN MORE
|
|
 |
High Performance OSB - LP 350, 450. Each provides a different combination of strength and moisture resistance levels.
|
| Engineered specifically for sub-flooring applications, LP® TopNotch® Sub-Flooring features our patented RainChannel™ technology that protects against moisture absorption and edge swell. LP TopNotch is the only family of sub-flooring that offers three performance solutions.
>> CLICK HERE TO LEARN MORE
|
|
 |
Industrial Particle Board is ideal for warehouses, basements, offices, or workshops.
|
| Particleboard (PB) is a composite panel product consisting of cellulosic particles of various sizes that are bonded together with a synthetic resin or binder under heat and pressure. Particle geometry, resin levels, board density and manufacturing processes may be modified to produce products suitable for specific end uses. At the time of manufacture, additives can be incorporated to impart specific performance enhancements including greater dimensional stability, increased fire retardancy and moisture resistance.
>> CLICK HERE TO LEARN MORE
|
|
 |
Medium Density Fiberboard
|
| Medium Density Fiberboard (MDF) is widely used in the manufacturing of furniture, kitchen cabinets, door parts, mouldings, millwork and laminate flooring. MDF panels are manufactured with a variety of physical properties and dimensions, providing the opportunity to design the end product with the specific MDF needed.
>> CLICK HERE TO LEARN MORE
|
|
 |
Radiant Barrier Sheathing - LP Techshield® is the original radiant barrier sheathing and the #1 selling brand.
|
| Installed in more than one million homes, it has been on the market for more than a decade. This innovative product helps block radiant heat in the roof from entering the attic, keeping the attic cooler, lowering energy costs and making the home more comfortable. LP TechShield is the only radiant barrier sheathing that features patented VaporVents™ technology, which allows it to dry more quickly from construction moisture than other radiant barriers.
>> CLICK HERE TO LEARN MORE
|
|
 |
LP® FlameBlock® Fire-Rated OSB Sheathing offers you the best of both worlds—impressive structural strength and remarkable burn-through fire resistance.
|
| Created by applying a patented, non-combustible Pyrotite® coating to LP® OSB panels, LP FlameBlock Sheathing is an ICC certified (ESR-1365), structural fire-rated sheathing with a Class A Flame Spread Rating. It provides extended burn-through resistance, delivering a 20-minute thermal barrier (ASTM E119). It's durable on the job site, easy to work with, and is Exposure-1 rated to withstand weather during normal construction delays. LP FlameBlock Sheathing is cost competitive and is available in a variety of PS2-rated thicknesses and lengths, including Struc-1. Plus it contains no hazardous chemicals. Backed by a 20-Year Transferable Limited Warranty, LP FlameBlock Sheathing is the one to count on when every minute counts.
>> CLICK HERE TO LEARN MORE
|
|
 |
Hardwood Plywood has several key advantages:
|
- Environmental Investment - It is a natural product made from a renewable resource. Therefore, it is one of the most environmentally friendly decorative products available to the consumer.
- Strength - Pound for pound, plywood is stronger than steel in static bending strength. What makes plywood so strong is its unique cross-layered structure. The adhesives used to bond the veneers in plywood are actually stronger than the wood itself.
- Efficiency - The plywood manufacturing process achieves a more complete utilization of the log than does lumber manufacturing. No sawdust results from either rotary cutting or slicing (the two most popular methods of cutting veneer). Greater square foot coverage, in comparison to solid wood products, is achieved by using veneer. Thus, plywood manufacturing makes better use of the high value woods prized by consumers today.
- Beauty - Architects and designers prefer the beauty of wood over any other material. The natural characteristics of wood make it attractive to the eye. Wood defies imitation. No material can match the infinite variety of natural markings and figure patterns offered through fine hardwood.
- Versatility - A great variety of products in various shapes and sizes can be manufactured from hardwood plywood. Chair backs and seats, domes, bowling alley channels, and pianos are just a few of the many various curved plywood products.
- Durability - In museums all over the world are ancient examples of plywood furniture and decorative veneers that have lasted hundreds of years.
>> CLICK HERE TO LEARN MORE
|
 |
Lauan Plywood
|
| An inexpensive grade of Mahogany plywood available in 1/8" and ¼" 4x8 pieces. Perfect for Cabinet backing, or any utility purpose. |
Other
 |
Amerimax Home Products is an international producer of aluminum, steel, vinyl, copper and fiberglass products.
|
| For original equipment manufacturers,distributors, contractors and home centers worldwide.Our core products include specialty coated coils, metal wall and roof systems, metal and vinyl rain carrying systems, soffit and fascia systems, roofing accessories, aluminum and vinyl windows and doors, patio products, aluminum recreational vehicle doors, windows and sidewalls and aluminum bath and shower enclosures.
>> CLICK HERE TO LEARN MORE
|
|
 |
Dow Styrafoam Insulation
|
| For more than six decades, iconic Blue™ STYROFOAM™ insulation from The Dow Chemical Company has helped conserve energy and reduce CO2 emissions in homes and buildings by more than 250 million metric tons.
>> CLICK HERE TO LEARN MORE
|
|
 |
Pactiv Insulation
|
| With its extruded polystyrene (XPS) construction, this board does not absorb water, is not a food source for mold, and is not subject to moisture-related damage and deterioration. An R-Value of 5.0 per inch of thickness makes it an excellent thermal insulator that increases the energy efficiency of your structures. And it retains its insulating properties over time. The board also provides an extra barrier against moisture infiltration. Choose between a square edge (CM) and an interlocking shiplap edge (SL) that helps reduce energy-robbing air leaks at seams and gaps. XPS Insulation Board is ideal for a variety of applications, including below slab, below grade along the foundation, inside basement walls, exterior insulation over wood sheathing, and residing.
>> CLICK HERE TO LEARN MORE
|
|
 |
R-Max Insulation is Energy Star approved.
|
| This product is designed to be covered with siding materials of wood, wood-based products, cement based sidings, aluminum, vinyl, brick, or stucco veneers. The white-matte (non-glare) side of this sheathing panel is installed facing to the outside of the wall structure when the exterior siding will be wood, wood-based products, cement based sidings, aluminum or vinyl sidings. The reflective aluminum side of the sheathing panel is installed to the outside of the wall structure when the exterior finish will be either brick or stucco. R-Matte Plus-3 can also be installed on the inside surface of walls when properly covered by an approved thermal barrier.
>> CLICK HERE TO LEARN MORE
|
|
 |
Silverline Windows offers the highest quality window at the best possible price.
|
| By extruding our own vinyl, injection molding our own hardware, and insulating our own glass units, we are better able to control quality as well as cost, and pass the savings on to you. We pack countless features into every window and door, in an effort to provide you with a product that will outperform and outlast the competition. We give you all of this at a price that's right, and back it with our Limited Lifetime Warranty.
>> CLICK HERE TO LEARN MORE
|
|
 |
VinylKraft Windows are made with thermal and structural performance in mind.
|
| This high-performance vinyl window makes maintenance a thing of the past. Enjoy the beauty, high performance, and maintenance-free convenience that only the Vinyl Kraft has to offer. Our double-hung window comes in standard colors of white or almond and offers unlimited exterior options.
>> CLICK HERE TO LEARN MORE
|
|
|
R-Mor House Wrap
|
|
Woven plastic wrap used as an air and moisture infiltration barrier in the construction and repair of residential and commercial buildings and for industrial packaging
|
|
SYP Flooring - Warm and inviting, Southern Yellow Pine Flooring.
Also called yellow pine flooring or Southern pine flooring - is an American classic. Imparting a distinctively traditional look, yellow pine flooring comes from one of our most abundant and renewable species - Southern Yellow Pine.
>> CLICK HERE TO LEARN MORE
|
 |
Pine Pattern Stock
|
|
|
 |
Rebar/Remesh
|
- Masonry reinforcement
- Solid steel
- 1/2" Diameter (#4) x 24" long
- Great for securing landscape timbers/railroad ties
- Cut to size rebar saves time at jobsites
- Often used in landscaping, log home construction, as garden stakes and survey markers
- Rebar is still the most commonly accepted form of steel concrete reinforcing.
- Ends are color codes 3/8" white & 1/2" blue
|
 |
Treated Lumber
|
|
All measures that are taken to ensure a long life of wood fall under the definition wood preservation (timber treatment). Apart from structural wood preservation measures, there are a number of different (chemical) preservatives and processes (also known as timber treatment or lumber treatment) that can extend the life of wood, timber, wood structures or engineered wood. These generally increase the durability and resistance from being destroyed by insects or fungus.
|
|
 |
Mid-America Shutters are the most economical option for putting exterior shutters on your home.
|
|
Mid-America vinyl shutters are extremely popular because of the many options available. Whether you choose standard or custom shutters, SolidThru™ or paintable shutters, louvered shutters, panel shutters, or board and batten shutters, Mid-America has an option that is right for you!
>> CLICK HERE TO LEARN MORE
|
|
 |
Turncraft Columns may be load-bearing or purely decorative.
|
| Classic architectural columns are built according to the Classic Orders of Architecture, recorded by Giacomo Barozzi da Vignola, one of the great Italian architects of 16th century. Turncraft columns are manufactured to closely follow the recommendations of 'The American Vignola, The Five Orders' by Willian R. Ware.
>> CLICK HERE TO LEARN MORE
|
|
Scaffold Plank
Scaffold Plank
NILCO has solid sawn and laminated OSHA scaffold plank in stock!
Pneumatic Fasteners
NILCO PNEUMATICS offers full line of pneumatic tools and fasteners. We will maintain equipment and provide full service as required!
|
